To add a Video to either a blog post or a listing you will need 1 of 2 things;
- A YouTube or Vimeo share code OR,
- An embed code
A YouTube or Vimeo share code will look like this: https://youtu.be/OvxgwZD5ZAo
An embed code will look like this: <iframe width="560" height="315" src="https://www.youtube.com/embed/OvxgwZD5ZAo" frameborder="0" allowfullscreen></iframe>
**If you are using a video service other than YouTube or Vimeo we recommend an embed code. However, if you can use YouTube or Vimeo that is the easiest/most foolproof way of getting a video up**
For Blog Posts:
When you are working on your blog post, go to the right hand side and switch the toggle from Standard to Video.
Once you are in Video mode, you will enter the YouTube or Vimeo share code in the top field:
If you have an Embed code instead, you'll put it in the bottom field:
To add a video to a Listing (Property Landing Page), you'll scroll all the way down towards the bottom of the 'Edit Listing' page (past the Open House section), and you'll see the Video Post Information section.
If you have a YouTube or Vimeo share code, that will go in the top field:
If you have an embed code instead, that will go in the bottom field:
If you have any questions or run into any issues, please email us at firstname.lastname@example.org.